Description
Product: T-SD 0150
Description: T-SD 0150 is one of the styrenic terpolymer (ABS) grades with improved toughness compared to HIPS grades. It exhibits low shrinkage and good dimensional stability, making it ideal for general injection molding applications. This data serves as a guide for selecting the appropriate resin for various applications.
Applications:
- Furniture
- Automotive Parts
- General Injection Molding
- Appliances Casing
- Office Supplies
Drying Recommendations:
- Pre-processing drying in a desiccant dehumidifying hopper dryer is recommended.
- Inlet air dew point should be -20°F (-29°C) or below to achieve a moisture content of 0.1%.
- Typical drying conditions are:
- 2 hours at 180° – 190°F (82° – 88°C)
- Alternatively, drying for 4 hours at 160°-170°F (71°-77°C) is adequate.
Physical and Mechanical Properties:
| Property | Unit | Test Method | Typical Value |
|---|---|---|---|
| Melt Flow Index (200°C/5KG) | GR/10MIN | ASTM D-1238 | 1.8 |
| Izod Impact Strength | KGF.CM/CM | ASTM D-256 | 22 |
| Vicat Softening Point (5KGF Load) | °C | ASTM D-1525 | 98 |
| Tensile Strength at Yield | KGF/CM2 | ASTM D-638 (5mm/min) | 450 |
| Flexural Strength at Yield | KGF/CM2 | ASTM D-790 | 600 |
| Flexural Modulus | KGF/CM2 | ASTM D-790 | 22000 |
| Rockwell Hardness (at 23°C) | R.SCALE | ASTM D-785 | 105 |
Additional Information: *All above-mentioned data are typical values and not to be construed as real specifications. Users should confirm results through their tests. For guaranteed items, refer to S.S.S. (Standard Sales Specifications).
