T-HD 103840 UA is a HDPE grade intended for applications including Good impact strength; Easy to demould. Review the listed technical properties and confirm current specifications, regulatory suitability and availability with the relevant supplier before purchase.
Representative disclosure:
Applications
- Good impact strength
- Easy to demould
- UV stabilised
- Good whiteness
- Excellent surface finish
- General purpose rotomolded items
- Septic tanks
- Recycling banks
Technical properties
Technical values are source-captured and pending confirmation against current supplier documentation.
| Property | Melt Flow Index (2.16 KG) | Unit | g/10min | Test Method | ASTM D-1238 | Typical Value | 4 |
|---|---|---|---|---|---|---|---|
| Property | Density | Unit | gr/cm³ | Test Method | ASTM D-1505 | Typical Value | 0.938 |
| Property | Yellowness Index | Unit | – | Test Method | ASTM E-313 | Typical Value | -1 |
| Property | Whiteness Index | Unit | – | Test Method | ASTM E-313 | Typical Value | 60 |
| Property | Contamination | Unit | No. | Test Method | BP137 | Typical Value | 5 |
| Property | Vicat Softening Point | Unit | °C | Test Method | ASTM D-1525 | Typical Value | 115 |
| Property | Tensile Stress at Yield | Unit | MPa | Test Method | ASTM D-638 | Typical Value | 15 |
| Property | Elongation at Break | Unit | % | Test Method | ASTM D-638 | Typical Value | 900 |
| Property | ESCR (IGEPAL 10% F50, 230°C) | Unit | hr | Test Method | ASTM D-1693 | Typical Value | 350 |
| Property | Charpy Impact | Unit | kJ/m² | Test Method | ASTM D-6110 | Typical Value | 18 |