T-PPH YD 225 is listed in the Polypropylene product family. Review the technical property table and confirm the intended application, current specifications, regulatory suitability and availability with the relevant supplier before purchase.
Representative disclosure:
Applications
Technical properties
Technical values are source-captured and pending confirmation against current supplier documentation.
| Property | MFI (@230°C & 2.16KG) | Unit | GR/10MIN | Test Method | ISO1133 | Typical Value | 22 |
|---|---|---|---|---|---|---|---|
| Property | Density | Unit | GR/CM3 | Test Method | ASTM D1505 | Typical Value | 0.9 |
| Property | Isotactic Degree | Unit | % | Test Method | ISO 9113 | Typical Value | >=94 |
| Property | Ash Content | Unit | PPM(WT) | Test Method | ISO 3451-1 | Typical Value | <=350 |
| Property | Chlorine Content | Unit | PPM(WT) | Test Method | ENCO METHOD | Typical Value | <=100 |
| Property | Volatile Content | Unit | %WT | Test Method | ENCO METHOD | Typical Value | <=0.2 |
| Property | Bulk Density | Unit | GR/CM3 | Test Method | ASTM D1895 | Typical Value | 0.43 |
| Property | Tensile Strength at Yield | Unit | MPA | Test Method | ISO 527 | Typical Value | 33 |
| Property | Elongation at Yield | Unit | % | Test Method | ISO 527 | Typical Value | 9 |
| Property | Flexural Modulus | Unit | MPA | Test Method | ISO 178 | Typical Value | 1450 |
| Property | Notched Izod Impact (@23°C) | Unit | KJ/M2 | Test Method | ISO 180/1A | Typical Value | 3 |
| Property | Rockwell Hardness | Unit | R SCALE | Test Method | ASTM D785 | Typical Value | 100 |
| Property | HDT (@0.46N/mm2) | Unit | °C | Test Method | ISO 75/B | Typical Value | 85 |
| Property | Vicat Softening Point (10N) | Unit | °C | Test Method | ISO 306A | Typical Value | 154 |
| Property | Melting Point (DSC) | Unit | °C | Test Method | ISO 11357-1 | Typical Value | 163 |