A 203026H is a LDPE grade intended for applications including Cast & Blown Film; Bags & Pouches. Review the listed technical properties and confirm current specifications, regulatory suitability and availability with the relevant supplier before purchase.
Representative disclosure:
Applications
- Cast & Blown Film
- Bags & Pouches
- Film & Shrink Film
- Food Packaging Film
- Surface Protection Film
- Cast Film
- Blown Film
- Opticals
- Good Processability
- Unspecified Slip
- Low Friction
- Good Stiffness
Technical properties
Technical values are source-captured and pending confirmation against current supplier documentation.
| No. | 1 | Property | Density | Value | 0.927 | Units | g/cm³ | Test Method | ISO 1183 |
|---|---|---|---|---|---|---|---|---|---|
| No. | 2 | Property | Melt Flow Rate (MFR) (190°C/2.16Kg) | Value | 2.0 | Units | g/10 min | Test Method | ISO 1133 |
| No. | 3 | Property | Tensile Modulus | Value | 300 | Units | MPa | Test Method | ISO 527-1, -2 |
| No. | 4 | Property | Tensile Stress at Yield | Value | 13.0 | Units | MPa | Test Method | ISO 527-1, -2 |
| No. | 5 | Property | Tensile Strength MD/TD | Value | 25/18 | Units | MPa | Test Method | ISO 527-1, -3 |
| No. | 6 | Property | Tensile Strain at Break MD/TD | Value | 350/600 | Units | % | Test Method | ISO 527-1, -3 |
| No. | 7 | Property | Dart Drop Impact (50 µm blown film) | Value | 110 | Units | g | Test Method | ASTM D 1709 |
| No. | 8 | Property | Vicat Softening Temp (A50 (50°C/h 10N)) | Value | 100 | Units | °C | Test Method | ISO 306 |
| No. | 9 | Property | Haze (50) | Value | <7.0 | Units | % | Test Method | ASTM D 1003 |
| No. | 10 | Property | Gloss (60°, 50) | Value | >110 | Units | % | Test Method | ASTM D 2457 |